casebg

Ghana 100TPH Alluvial gold wash plant

Ghana 100TPH Alluvial gold wash plant

Release time:26 February 2018
Ghana 100TPH Alluvial gold washing plant

JXSC have provided a complete set alluvial gold washing plant to our Ghana customer. This plant is 100TPH input process capacity, raw material is with much sticky clay, gold size is fine.

 

We have designed most effective process flowchart according to customer’s ore conditions, provide full set separation machines, and send our engineer to mine site for equipment installation and commissioning guidance.  

 

This plant’s process flowchart is as below. Full set equipments include 1 set vibration feeder +1 set gold washing trommel scrubber + 2 sets gold centrifugal concentrator + 2 sets gold sluice box +1 set 6S shaking table + 1 set slurry pump + 1 set water pump + 2 sets diesel generator + 1 set belt conveyor and other accessories.

 

Vibration feeder can feed materail evenly to washing machine, the trommel scrubber washing machine is especially good washing effect for clay gold, if the gold raw material is not with much sticky clay, can use the trommel screen.

 

Gold centrifugal concentrator is for gold concentration to remove light waste sand. Concentrate ore from centrifugal machine will go to shaking table for final concentration, then will get very high purity gold. If need to smelt to gold bar, use the gold smelting furance is ok.

 

JXSC can provide the gold washing plant capacity as per requested capacity from 5TPH to 200TPH or bigger, and recommend the most effective washing and separation machines as per gold ore conditions.