ARC type electrostatic separator
【Feeding size】: 0.1-3mm
【Application】: non-ferrous metal and black metal, such as iron ore, zircon, cassiterite(tin), ilmenite, rutile, primary limonite, beach placer, manganese ore, titanium, tantalum-niobium, monazite and primary retiles.Email: [email protected]
ARC Type Electrostatic Separator has the structure of two rows and four stories in each row. Each floor has an earthing curved slide board (stainless steel). On the top it has an arc-shaped high-voltage electrostatic plate (aluminum), which is stationary (but adjustable).
When connected to high voltage static electricity, the ore minerals slip into high-voltage field area via earthing arc plate, then conductive minerals charged by induction and attracted to the electrode. Due to gravity, it is discharged from the front which is different from the non-conductive ore. Meanwhile, non-conductive mineral has also been affected by the electric field, but will not be attracted into the lower re-sorting. The process will be conducted for four times until the minerals are qualified.
1.The machine is equipped with chassis and it should be placed vertically when installed.
2.It should be grounded well. The ground line should be buried with angle iron or water pipe into a 2-3 meters wet underground place.
3.High-voltage cables should be in plastic tube to prevent leakage.
4.Ore storage heating wire should be 4.5 square millimeter cable. There are high and low temperature switches in control cabinet.
|High voltage current||0-10MA||0-10MA|
If you have some questions about our products, please feel free to fill out the form below, and we will contact you within 24 hours. Rest assured that we won’t reveal your information to anyone.