{"id":17084,"date":"2020-09-17T16:56:27","date_gmt":"2020-09-17T08:56:27","guid":{"rendered":"https:\/\/www.jxscmachine.com\/?post_type=new&p=17084"},"modified":"2022-03-26T15:29:20","modified_gmt":"2022-03-26T07:29:20","slug":"7-cara-meningkatkan-efisiensi-pencucian-pasir","status":"publish","type":"new","link":"https:\/\/www.jxscmachine.com\/id\/new\/7-ways-improve-sand-washing-efficiency\/","title":{"rendered":"7 Cara untuk Meningkatkan Efisiensi Pencucian Pasir"},"content":{"rendered":"
\n\t
\n\t\t
\n\t\t\t
    \n
  • Apa yang harus dilakukan jika mesin cuci pasir memiliki efek pembersihan yang buruk? <\/span><\/li>\n
  • Efisiensi mesin cuci pasir rendah, bagaimana cara meningkatkan kapasitas produksi? <\/span><\/li>\n
  • Bagaimana cara mengatasi seringnya kerusakan mesin cuci pasir yang mempengaruhi produksi? <\/span><\/li>\n<\/ul>\n

     <\/p>\n

    Tim penjualan dan teknisi kami telah menerima banyak pertanyaan tentang pertanyaan-pertanyaan yang berkaitan dengan efisiensi dan produktivitas dari pembeli dan pelanggan, jadi dalam artikel ini, kami akan membagikan 7 cara untuk meningkatkan efisiensi mesin cuci pasir seperti mesin cuci pasir roda atau mesin cuci pasir spiral. <\/span><\/p>\n

     <\/p>\n

     <\/p>\n

      \n
    • \n

      Mencegah serpihan masuk ke dalam port pengisian daya<\/b><\/h2>\n<\/li>\n<\/ul>\n

       <\/p>\n

      Kebersihan dan kandungan lumpur pada pasir merupakan salah satu alasan menurunnya hasil dari mesin cuci pasir. <\/span><\/p>\n

       <\/p>\n

      Selama proses pembersihan mesin cuci pasir, perlu untuk mencegah kotoran mempengaruhi efek pembersihan produk jadi. Selain itu, perlu untuk mencegah material dengan kekerasan tinggi memasuki bagian dalam mesin, yang akan menyebabkan keausan pada peralatan dan mengurangi masa pakai.<\/span><\/p>\n

       <\/p>\n

       <\/p>\n

        \n
      • \n

        Kontrol level cairan mesin cuci pasir secara wajar<\/b><\/h2>\n<\/li>\n<\/ul>\n

         <\/p>\n

        Jika level cairan terlalu rendah, efek pembersihan tidak dapat dicapai; sementara level cairan terlalu tinggi, sumber daya air terbuang percuma, tetapi efek pembersihan yang ideal tidak tercapai, dan bijih cenderung meluap. Jumlah bahan untuk pembersihan satu kali harus dalam kisaran yang ditentukan, jika tidak maka akan rentan terhadap kegagalan.<\/span><\/p>\n

         <\/p>\n

         <\/p>\n

          \n
        • \n

          Sesuaikan konsentrasi ke nilai kritis<\/b><\/h2>\n<\/li>\n<\/ul>\n

           <\/p>\n

          Konsentrasi bijih adalah faktor utama yang perlu disesuaikan selama pengoperasian mesin cuci pasir. Hal ini terkait dengan ukuran partikel bergradasi dan juga terkait dengan kapasitas pemrosesan di bawah ukuran partikel ini.<\/span><\/p>\n

           <\/p>\n

          Kapasitas pemrosesan mesin pencuci pasir mencapai maksimum di bawah konsentrasi kritis. Konsentrasi kritis terkait dengan ukuran partikel bergradasi yang ditentukan dan berubah dengan kepadatan bijih dan kandungan lumpur. <\/span><\/p>\n

           <\/p>\n

          Semakin tinggi densitas bijih atau semakin rendah kandungan lumpur, semakin tinggi konsentrasi kritis, dan sebaliknya Tentu saja, hubungan antara konsentrasi kritis dan ukuran partikel bergradasi sama dengan kandungan lumpur, yaitu semakin rendah ukuran partikel bergradasi, semakin kecil konsentrasi kritis.<\/span><\/p>\n

           <\/p>\n

           <\/p>\n

            \n
          • \n

            Memperjelas sifat pasir dan kerikil<\/b><\/h2>\n<\/li>\n<\/ul>\n

             <\/p>\n

            Kapasitas produksi mesin cuci pasir terkait dengan sifat-sifat pasir dan kerikil, termasuk kekerasan, kepadatan, kandungan lumpur, ukuran partikel bahan pasir dan kerikil. Misalnya, bahan pasir dan kerikil yang tidak rata dan atributnya yang berbeda dapat mempengaruhi kapasitas pemrosesan peralatan pencuci pasir. Kepadatan material berbanding lurus dengan kapasitas produksi mesin cuci pasir. Pengaruh kandungan lumpur dan ukuran bijih terutama tercermin dalam viskositas bubur, yang mengurangi viskositas dan meningkatkan kecepatan sedimentasi partikel mineral. Kapasitas pemrosesan dan akurasi klasifikasi mesin cuci pasir akan lebih baik.<\/span><\/p>\n

             <\/p>\n

             <\/p>\n

              \n
            • \n

              Pastikan lokasi pemasangan sudah sesuai<\/b><\/h2>\n<\/li>\n<\/ul>\n

               <\/p>\n

              Mesin cuci pasir harus ditempatkan di lokasi yang sesuai, dapat ditempatkan di tanah yang datar, atau ditempatkan di tempat yang tinggi, tetapi bidangnya harus cukup keras, dan tidak boleh ditempatkan dekat dengan sumber air. Tempat-tempat ini rawan runtuh. Menyebabkan masalah produksi yang tidak perlu. Selain itu, harus ada ruang produksi yang cukup untuk memastikan transportasi dan produksi material yang stabil, dan ruang penyimpanan yang cukup untuk pasir buatan mesin setelah dibersihkan untuk menghindari polusi sekunder.<\/span><\/p>\n

               <\/p>\n

               <\/p>\n

                \n
              • \n

                Operator harus dilatih dengan baik<\/b><\/h2>\n<\/li>\n<\/ul>\n

                 <\/p>\n

                Menurut penelitian kami, lebih dari 60% kapasitas produksi yang rendah atau terpengaruh dapat disebabkan oleh kesalahan atau operasi Ilegal. Tingkat teknis yang buruk akan mempengaruhi pengoperasian normal peralatan, dan akan sangat mengurangi efisiensi produksi mesin cuci pasir. Dalam beberapa kasus, operasi yang salah tersebut bahkan dapat merusak peralatan.<\/span><\/p>\n

                 <\/p>\n

                 <\/p>\n

                  \n
                • \n

                  Inspeksi harian<\/b><\/h2>\n<\/li>\n<\/ul>\n

                   <\/p>\n

                  Sebelum mesin bekerja, memeriksa peralatan dengan hati-hati sangat dianjurkan. Aturan ini tidak hanya cocok untuk mesin cuci pasir, tetapi juga untuk semua jenis peralatan.<\/span><\/p>\n

                   <\/p>\n

                  Berikut adalah beberapa aspek yang harus Anda periksa sebelum menjalankan mesin cuci pasir:<\/span><\/p>\n

                    \n
                  1. Periksa apakah ada sisa kotoran di dalam ember, port pembuangan, tangki penyimpanan air, dll. pada peralatan. Jika perlu, segera bersihkan. Pastikan jalur setiap komponen tidak terhalang dan bersih.<\/span><\/li>\n
                  2. Periksa kekencangan baut jangkar sambungan peralatan, lakukan tindakan tegas untuk baut yang longgar, dan pastikan kestabilan sambungan komponen peralatan, terutama kekencangan sekrup.<\/span><\/li>\n
                  3. Kuantitas oli peredam harus diperiksa tepat waktu selama pengoperasian, dan transmisi roda gigi peralatan harus dijaga agar tetap dalam kondisi baik untuk memastikan sabuk transmisi roda gigi tidak aus atau rusak.<\/span><\/li>\n
                  4. Pengumpanan peralatan harus dipastikan secara terus menerus dan merata, dan tidak boleh terlalu banyak atau terlalu sedikit, yang akan mengakibatkan pembersihan material tidak memadai.<\/span><\/li>\n
                  5. Setiap bantalan dan peredam yang berputar harus memastikan bahwa pelumasnya cukup dan bersih. Pada saat yang sama, perlu untuk memilih pelumas yang sesuai untuk meningkatkannya. Pelumas peredam harus diganti tepat waktu setelah satu bulan penggunaan. Proses tersebut harus memastikan kebersihan bantalan peralatan dan menambahkan pipa untuk mencegah kontaminasi pelumas.<\/span><\/li>\n
                  6. Mesin cuci pasir harus dibersihkan tepat waktu setelah digunakan, jika tidak, pipa akan tersumbat setelah sekian lama.<\/span><\/li>\n
                  7. Amati keausan internal mesin cuci pasir secara teratur. Jika komponen ditemukan aus yang mempengaruhi produksi dan operasi, komponen tersebut harus diperbaiki atau diganti tepat waktu.<\/span><\/li>\n<\/ol>\n

                     <\/p>\n

                    Dalam proses produksi dan operasi jangka panjang, mesin cuci pasir akan mempengaruhi efek dan efisiensi pencucian pasir karena berbagai masalah. Jika Anda juga mengalami masalah ini dalam produksi di masa mendatang, Anda mungkin ingin memeriksa 7 aspek di atas untuk menemukan penyebab yang tepat dan meresepkan obat yang tepat. <\/span><\/p>\n

                     <\/p>\n

                    Kami berharap metode tersebut akan membantu Anda ketika Anda menghadapi situasi tersebut.<\/span><\/p>\n

                     <\/p>\n\n\t\t<\/div>\n\t<\/div>\n<\/div><\/div><\/div><\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

                    Apa yang harus dilakukan jika mesin cuci pasir memiliki efisiensi pembersihan yang buruk? Bagaimana cara mengatasi seringnya kerusakan mesin cuci pasir yang mempengaruhi produksi? Pakar pertambangan kami akan membantu Anda memecahkan masalah tersebut dalam artikel ini.<\/p>","protected":false},"author":1,"featured_media":17085,"parent":0,"menu_order":230,"comment_status":"closed","ping_status":"open","template":"","format":"standard","meta":{"_acf_changed":false,"ngg_post_thumbnail":0,"footnotes":""},"categories":[],"tags":[],"class_list":["post-17084","new","type-new","status-publish","format-standard","has-post-thumbnail","hentry"],"acf":[],"yoast_head":"\n7 Ways to Improve Sand Washing Efficiency - JXSC Machine<\/title>\n<meta name=\"description\" content=\"What to do if the sand washing machine has poor cleaning efficiency? How to deal with the frequent failure of sand washing machines that affects production? Our mining experts will help you to solve those problems in this article.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.jxscmachine.com\/id\/baru\/7-cara-meningkatkan-efisiensi-pencucian-pasir\/\" \/>\n<meta property=\"og:locale\" content=\"id_ID\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"7 Ways to Improve Sand Washing Efficiency - JXSC Machine\" \/>\n<meta property=\"og:description\" content=\"What to do if the sand washing machine has poor cleaning efficiency? How to deal with the frequent failure of sand washing machines that affects production? Our mining experts will help you to solve those problems in this article.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.jxscmachine.com\/id\/baru\/7-cara-meningkatkan-efisiensi-pencucian-pasir\/\" \/>\n<meta property=\"og:site_name\" content=\"JXSC Machine\" \/>\n<meta property=\"article:modified_time\" content=\"2022-03-26T07:29:20+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.jxscmachine.com\/wp-content\/uploads\/2020\/09\/sand-washing-machines-improve-efficiency.png\" \/>\n\t<meta property=\"og:image:width\" content=\"554\" \/>\n\t<meta property=\"og:image:height\" content=\"291\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Estimasi waktu membaca\" \/>\n\t<meta name=\"twitter:data1\" content=\"5 menit\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.jxscmachine.com\\\/new\\\/7-ways-improve-sand-washing-efficiency\\\/\",\"url\":\"https:\\\/\\\/www.jxscmachine.com\\\/new\\\/7-ways-improve-sand-washing-efficiency\\\/\",\"name\":\"7 Ways to Improve Sand Washing Efficiency - JXSC Machine\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.jxscmachine.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.jxscmachine.com\\\/new\\\/7-ways-improve-sand-washing-efficiency\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.jxscmachine.com\\\/new\\\/7-ways-improve-sand-washing-efficiency\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.jxscmachine.com\\\/wp-content\\\/uploads\\\/2020\\\/09\\\/sand-washing-machines-improve-efficiency.png\",\"datePublished\":\"2020-09-17T08:56:27+00:00\",\"dateModified\":\"2022-03-26T07:29:20+00:00\",\"description\":\"What to do if the sand washing machine has poor cleaning efficiency? How to deal with the frequent failure of sand washing machines that affects production? Our mining experts will help you to solve those problems in this article.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.jxscmachine.com\\\/new\\\/7-ways-improve-sand-washing-efficiency\\\/#breadcrumb\"},\"inLanguage\":\"id\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.jxscmachine.com\\\/new\\\/7-ways-improve-sand-washing-efficiency\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"id\",\"@id\":\"https:\\\/\\\/www.jxscmachine.com\\\/new\\\/7-ways-improve-sand-washing-efficiency\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.jxscmachine.com\\\/wp-content\\\/uploads\\\/2020\\\/09\\\/sand-washing-machines-improve-efficiency.png\",\"contentUrl\":\"https:\\\/\\\/www.jxscmachine.com\\\/wp-content\\\/uploads\\\/2020\\\/09\\\/sand-washing-machines-improve-efficiency.png\",\"width\":554,\"height\":291,\"caption\":\"7 ways to improve sand washing efficiency What to do if the sand washing machine has a poor cleaning effect? The efficiency of a sand washing machine is low, how to increase production capacity? How to deal with the frequent failure of sand washing machines that affects production? Our sales and engineering team has received a lot of questions about those questions related to efficiency and productivity from buyers and customers, so in this article, we're going to share 7 ways to improve efficiency of sand washing machines like the wheel sand washer or spiral sand washer. Prevent debris from entering the charging port The cleanliness and mud content of sand are one of the reasons for the decline in the output of sand washing machines. During the cleaning process of the sand washer, it is necessary to prevent impurities from affecting the cleaning effect of the finished product. In addition, it is necessary to prevent materials with high hardness from entering the inside of the machine, which will cause wear to the equipment and reduce the service life. Control the liquid level of the sand washing machine reasonably If the liquid level is too low, the cleaning effect cannot be achieved; while the liquid level is too high, water resources are wasted, but the ideal cleaning effect is not achieved, and the ore is likely to overflow. The amount of materials for one-time cleaning must be within the specified range, otherwise it is prone to failure. Adjust the concentration to the critical value Ore concentration is the main factor that needs to be adjusted during the operation of the sand washing machine. It is related to the graded particle size and also related to the processing capacity under this particle size. The processing capacity of the sand washing machine reaches the maximum under the critical concentration. The critical concentration is related to the specified graded particle size and changes with the density of the ore and the mud content. The higher the ore density or the lower the mud content, the higher the critical concentration, and vice versa Of course, the relationship between the critical concentration and the graded particle size is the same as the mud content, that is, the lower the graded particle size, the smaller the critical concentration. Clarify sand and gravel properties The production capacity of the sand washing machine is related to the properties of sand and gravel, including the hardness, density, mud content, particle size of the sand and gravel materials. For example, the uneven sand and gravel materials and their own different attributes may affect the processing capacity of the sand washing equipment. The density of the material is directly proportional to the production capacity of the sand washing machine. The influence of mud content and ore size is mainly reflected in the viscosity of the slurry, which reduces the viscosity and increases the sedimentation speed of mineral particles. The processing capacity and classification accuracy of the sand washing machine will be better. Make sure the installation location is appropriate The sand washer should be placed in a suitable location, it can be placed on a flat ground, or placed at a high place, but the plane must be hard enough, and it must not be placed close to the water source. These places are prone to collapse. Cause unnecessary production troubles. In addition, there must be sufficient production space to ensure stable material transportation and production, and sufficient storage space for machine-made sand after cleaning to avoid secondary pollution. The operators should be properly trained According to our research, more than 60% of low or affected production capacity may be caused by the error or Illegal operation. Poor technical level will affect the normal operation of the equipment, and will greatly reduce the production efficiency of the sand washing machine. In some cases, those wrong operations may even break the equipment. Daily inspection Before the machine runs, checking the equipment carefully is highly recommended. This rule is not only suitable for sand wash machines, but also for all kinds of equipment. Here are some aspects you should checked before run the sand washer: Check whether there are residual impurities in the bucket, discharge port, water storage tank, etc. of the equipment. If necessary, remove them immediately. Make sure that the passage of each component is unobstructed and clean. Check the firmness of the equipment connection anchor bolts, take firm measures for loose bolts, and ensure the stability of the connection of the equipment components, especially the tightness of the screws. The oil quantity of the reducer should be checked in time during operation, and the gear transmission of the equipment should be kept in good gear to ensure that the gear transmission belt is not worn or damaged. The feeding of equipment should be ensured continuously and evenly, and it should not be too much or too little, which will result in insufficient material cleaning. Each rotating bearing and reducer should ensure that the lubricant is sufficient and clean. At the same time, it is necessary to select a suitable lubricant to increase it. The lubricant of the reducer should be replaced on time after one month of use. The process must ensure the cleanliness of the equipment bearings and adding pipes to prevent contamination of the lubricant. The sand washing machine should be cleaned in time after use, otherwise the pipeline will be blocked after a long time. Regularly observe the internal wear and tear of the sand washer. If parts are found to be worn to affect production and operation, they must be repaired or replaced in time. In the long-term production and operation process, the sand washing machine will affect the sand washing effect and efficiency due to various problems. If you also encounter this problem in future production, you may wish to check the above 7 aspects to find the right cause and prescribe the right medicine. We hope those methods will help you when you meet those situations.\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.jxscmachine.com\\\/new\\\/7-ways-improve-sand-washing-efficiency\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.jxscmachine.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"News\",\"item\":\"https:\\\/\\\/www.jxscmachine.com\\\/new\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"7 Ways to Improve Sand Washing Efficiency\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.jxscmachine.com\\\/#website\",\"url\":\"https:\\\/\\\/www.jxscmachine.com\\\/\",\"name\":\"JXSC Machine\",\"description\":\"40+ Years' Mineral Separating Equipment Manufacturer\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.jxscmachine.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"id\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"7 Cara Meningkatkan Efisiensi Pencucian Pasir - Mesin JXSC","description":"Apa yang harus dilakukan jika mesin cuci pasir memiliki efisiensi pembersihan yang buruk? Bagaimana cara mengatasi seringnya kerusakan mesin cuci pasir yang mempengaruhi produksi? Pakar pertambangan kami akan membantu Anda memecahkan masalah tersebut dalam artikel ini.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.jxscmachine.com\/id\/baru\/7-cara-meningkatkan-efisiensi-pencucian-pasir\/","og_locale":"id_ID","og_type":"article","og_title":"7 Ways to Improve Sand Washing Efficiency - JXSC Machine","og_description":"What to do if the sand washing machine has poor cleaning efficiency? How to deal with the frequent failure of sand washing machines that affects production? Our mining experts will help you to solve those problems in this article.","og_url":"https:\/\/www.jxscmachine.com\/id\/baru\/7-cara-meningkatkan-efisiensi-pencucian-pasir\/","og_site_name":"JXSC Machine","article_modified_time":"2022-03-26T07:29:20+00:00","og_image":[{"width":554,"height":291,"url":"https:\/\/www.jxscmachine.com\/wp-content\/uploads\/2020\/09\/sand-washing-machines-improve-efficiency.png","type":"image\/png"}],"twitter_card":"summary_large_image","twitter_misc":{"Estimasi waktu membaca":"5 menit"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.jxscmachine.com\/new\/7-ways-improve-sand-washing-efficiency\/","url":"https:\/\/www.jxscmachine.com\/new\/7-ways-improve-sand-washing-efficiency\/","name":"7 Cara Meningkatkan Efisiensi Pencucian Pasir - Mesin JXSC","isPartOf":{"@id":"https:\/\/www.jxscmachine.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.jxscmachine.com\/new\/7-ways-improve-sand-washing-efficiency\/#primaryimage"},"image":{"@id":"https:\/\/www.jxscmachine.com\/new\/7-ways-improve-sand-washing-efficiency\/#primaryimage"},"thumbnailUrl":"https:\/\/www.jxscmachine.com\/wp-content\/uploads\/2020\/09\/sand-washing-machines-improve-efficiency.png","datePublished":"2020-09-17T08:56:27+00:00","dateModified":"2022-03-26T07:29:20+00:00","description":"Apa yang harus dilakukan jika mesin cuci pasir memiliki efisiensi pembersihan yang buruk? Bagaimana cara mengatasi seringnya kerusakan mesin cuci pasir yang mempengaruhi produksi? Pakar pertambangan kami akan membantu Anda memecahkan masalah tersebut dalam artikel ini.","breadcrumb":{"@id":"https:\/\/www.jxscmachine.com\/new\/7-ways-improve-sand-washing-efficiency\/#breadcrumb"},"inLanguage":"id","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.jxscmachine.com\/new\/7-ways-improve-sand-washing-efficiency\/"]}]},{"@type":"ImageObject","inLanguage":"id","@id":"https:\/\/www.jxscmachine.com\/new\/7-ways-improve-sand-washing-efficiency\/#primaryimage","url":"https:\/\/www.jxscmachine.com\/wp-content\/uploads\/2020\/09\/sand-washing-machines-improve-efficiency.png","contentUrl":"https:\/\/www.jxscmachine.com\/wp-content\/uploads\/2020\/09\/sand-washing-machines-improve-efficiency.png","width":554,"height":291,"caption":"7 ways to improve sand washing efficiency What to do if the sand washing machine has a poor cleaning effect? The efficiency of a sand washing machine is low, how to increase production capacity? How to deal with the frequent failure of sand washing machines that affects production? Our sales and engineering team has received a lot of questions about those questions related to efficiency and productivity from buyers and customers, so in this article, we're going to share 7 ways to improve efficiency of sand washing machines like the wheel sand washer or spiral sand washer. Prevent debris from entering the charging port The cleanliness and mud content of sand are one of the reasons for the decline in the output of sand washing machines. During the cleaning process of the sand washer, it is necessary to prevent impurities from affecting the cleaning effect of the finished product. In addition, it is necessary to prevent materials with high hardness from entering the inside of the machine, which will cause wear to the equipment and reduce the service life. Control the liquid level of the sand washing machine reasonably If the liquid level is too low, the cleaning effect cannot be achieved; while the liquid level is too high, water resources are wasted, but the ideal cleaning effect is not achieved, and the ore is likely to overflow. The amount of materials for one-time cleaning must be within the specified range, otherwise it is prone to failure. Adjust the concentration to the critical value Ore concentration is the main factor that needs to be adjusted during the operation of the sand washing machine. It is related to the graded particle size and also related to the processing capacity under this particle size. The processing capacity of the sand washing machine reaches the maximum under the critical concentration. The critical concentration is related to the specified graded particle size and changes with the density of the ore and the mud content. The higher the ore density or the lower the mud content, the higher the critical concentration, and vice versa Of course, the relationship between the critical concentration and the graded particle size is the same as the mud content, that is, the lower the graded particle size, the smaller the critical concentration. Clarify sand and gravel properties The production capacity of the sand washing machine is related to the properties of sand and gravel, including the hardness, density, mud content, particle size of the sand and gravel materials. For example, the uneven sand and gravel materials and their own different attributes may affect the processing capacity of the sand washing equipment. The density of the material is directly proportional to the production capacity of the sand washing machine. The influence of mud content and ore size is mainly reflected in the viscosity of the slurry, which reduces the viscosity and increases the sedimentation speed of mineral particles. The processing capacity and classification accuracy of the sand washing machine will be better. Make sure the installation location is appropriate The sand washer should be placed in a suitable location, it can be placed on a flat ground, or placed at a high place, but the plane must be hard enough, and it must not be placed close to the water source. These places are prone to collapse. Cause unnecessary production troubles. In addition, there must be sufficient production space to ensure stable material transportation and production, and sufficient storage space for machine-made sand after cleaning to avoid secondary pollution. The operators should be properly trained According to our research, more than 60% of low or affected production capacity may be caused by the error or Illegal operation. Poor technical level will affect the normal operation of the equipment, and will greatly reduce the production efficiency of the sand washing machine. In some cases, those wrong operations may even break the equipment. Daily inspection Before the machine runs, checking the equipment carefully is highly recommended. This rule is not only suitable for sand wash machines, but also for all kinds of equipment. Here are some aspects you should checked before run the sand washer: Check whether there are residual impurities in the bucket, discharge port, water storage tank, etc. of the equipment. If necessary, remove them immediately. Make sure that the passage of each component is unobstructed and clean. Check the firmness of the equipment connection anchor bolts, take firm measures for loose bolts, and ensure the stability of the connection of the equipment components, especially the tightness of the screws. The oil quantity of the reducer should be checked in time during operation, and the gear transmission of the equipment should be kept in good gear to ensure that the gear transmission belt is not worn or damaged. The feeding of equipment should be ensured continuously and evenly, and it should not be too much or too little, which will result in insufficient material cleaning. Each rotating bearing and reducer should ensure that the lubricant is sufficient and clean. At the same time, it is necessary to select a suitable lubricant to increase it. The lubricant of the reducer should be replaced on time after one month of use. The process must ensure the cleanliness of the equipment bearings and adding pipes to prevent contamination of the lubricant. The sand washing machine should be cleaned in time after use, otherwise the pipeline will be blocked after a long time. Regularly observe the internal wear and tear of the sand washer. If parts are found to be worn to affect production and operation, they must be repaired or replaced in time. In the long-term production and operation process, the sand washing machine will affect the sand washing effect and efficiency due to various problems. If you also encounter this problem in future production, you may wish to check the above 7 aspects to find the right cause and prescribe the right medicine. We hope those methods will help you when you meet those situations."},{"@type":"BreadcrumbList","@id":"https:\/\/www.jxscmachine.com\/new\/7-ways-improve-sand-washing-efficiency\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.jxscmachine.com\/"},{"@type":"ListItem","position":2,"name":"News","item":"https:\/\/www.jxscmachine.com\/new\/"},{"@type":"ListItem","position":3,"name":"7 Ways to Improve Sand Washing Efficiency"}]},{"@type":"WebSite","@id":"https:\/\/www.jxscmachine.com\/#website","url":"https:\/\/www.jxscmachine.com\/","name":"Mesin JXSC","description":"40+ Tahun' Produsen Peralatan Pemisah Mineral","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.jxscmachine.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"id"}]}},"_links":{"self":[{"href":"https:\/\/www.jxscmachine.com\/id\/wp-json\/wp\/v2\/new\/17084","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.jxscmachine.com\/id\/wp-json\/wp\/v2\/new"}],"about":[{"href":"https:\/\/www.jxscmachine.com\/id\/wp-json\/wp\/v2\/types\/new"}],"author":[{"embeddable":true,"href":"https:\/\/www.jxscmachine.com\/id\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.jxscmachine.com\/id\/wp-json\/wp\/v2\/comments?post=17084"}],"version-history":[{"count":0,"href":"https:\/\/www.jxscmachine.com\/id\/wp-json\/wp\/v2\/new\/17084\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.jxscmachine.com\/id\/wp-json\/wp\/v2\/media\/17085"}],"wp:attachment":[{"href":"https:\/\/www.jxscmachine.com\/id\/wp-json\/wp\/v2\/media?parent=17084"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.jxscmachine.com\/id\/wp-json\/wp\/v2\/categories?post=17084"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.jxscmachine.com\/id\/wp-json\/wp\/v2\/tags?post=17084"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}