JXSC has provided a complete set of washing, screening, crushing, and gravity separation machines & all accessories for the alluvial tin processing in Uganda. We offer a detailed layout design, along with base construction drawings, and send the engineers to install the machines.
30TPH Alluvial Tin Processing Plant in Uganda
Published Date：09 Januari 2026Sharer: Jenny
Proyek: 30TPH Alluvial Tin Processing Plant
Lokasi Proyek: Uganda
What Does Jenny Say?
30 TPH Alluvial Tin Process Plant in Uganda
1. Customer’s Tin Project Information
Lokasi: Uganda
Raw ore condition: Alluvial tin mainly with a lot of sticky clay, with coarse tin concentrate and fine tin concentrates as well. Need to enrich coarse tin concentrate into fine powder to improve the grade.
Persyaratan utama pelanggan: 30tph, a higher recovery rate as possible. High configuration. We need a mesin dewatering to recycle water and tailing sand with reduced moisture content.
2. Our Process Design & Solution
Process Description
Stage 1: Primary Screening & Classification
- Excavators load raw ore into vibrating feeders equipped with 70mm grizzly screens
- Sub-70mm material passes through for scrubbing, while oversize is rejected
- The trommel scrubber features dual screening layers (7mm and 25mm apertures)
- Output produces three classified fractions: 0-7mm, 7-25mm, and +25mm materials
Stage 2: Multi-Stage Jig Separation System
- +25mm fraction diverted directly to stockpile via conveyor belt
- 7-25mm fraction undergoes primary jig separation:
1. Rougher jig produces initial concentrate for cleaning jigs
2. Closed-circuit design maximizes mineral recovery - 0-7mm fraction processed through dedicated jig circuit:
1. Separate the rougher jig from the cleaner jig refinement
2. Scavenger jig processes rougher tailings
Stage 3: Concentrate Dewatering & Preparation
- All jig concentrates first pass through dewatering screens
- Screen oversize is conveyed to the hammer crusher for size reduction
- Screen undersize is pumped to the mixing tank as slurry
- Crusher discharge flows by gravity to the same mixing tank
Stage 4: Final Concentration & Refinement
- Shaking tables upgrade concentrate purity
- Dried table concentrate passes through triple-disc dry magnetic separators
- Final product: High-grade tin concentrate
Stage 5: Tailings Management System
- Combined jig and table tailings processed through:
1. Spiral dewaterers for moisture reduction
2. High-frequency vibration screens - Produces two tailings products:
1. Coarse sand fraction
2. Fine sand fraction
Process Flowchart
Main Equipment List
- Pengumpan bergetar
- Jig concentration
- Penghancur palu
- Spiral washer
- Layar pengurasan air
- Meja Goyang
- Konveyor Sabuk
- Pumps
3. Customer Questions & Our Answers
Question: Can JXSC provide an agitated feed tank for the shaker table?
Jawaban: Yes, we can provide the agitated feed tank before the shaker table.
Question: Control panel layout Diagram
Jawaban: We can provide the electric control panel, just additional cost will be needed. The electric wire & cable layout will be provided after the order is placed.
Question: Installation/construction Schedule
Jawaban: Installation time around 1.5 months, based on all things being ready at your side and your workers being cooperative, etc.The time for reference
Question: Provide a basic labour schedule for the operation of the plant
Jawaban: Total at least 5 persons are needed to run the plant.
1 manager
1 for feeding + trommel
1 for jigs
1 for meja goyang + crusher
1 for spiral washing +vibration screen
Questions: Sand Pump Curves
Jawaban: See the individual attachment for your reference.
4. Production, Shipping & On-site
Manufacturing Photos
Delivery Photos
This project underscores JXSC’s capability to deliver high-recovery, low-waste solutions for alluvial tin miners, combining robust equipment with adaptable processes for varied ore profiles.
Key Process Achievements
- Advanced trommel scrubbing system with dual-layer screening (7mm/25mm) effectively removed sticky clay and pre-classified ore.
- Multi-stage jigging circuit (roughing—cleaning—scavenging) maximized recovery of coarse and fine tin particles.
- Integrated dewatering & water recycling (spiral dewaterer + high-frequency screens) reduced tailings moisture and minimized water waste.
- Final purification via shaking tables and dry magnetic separators ensured high-grade tin concentrate output.
Client-Centric Design Highlights
- Scalable configuration: Modular layout allows future capacity upgrades.
- Labor-efficient operation: Streamlined workflow requiring only 5 personnel for full plant control.
- Customized automation: Optional agitated feed tanks and electric control panels provided for stable shaker table performance.
Why The Client Chose JXSC?
① Clay-handling expertise: Specialized trommel scrubber and jigging loops adapted to Uganda’s challenging alluvial ore.
② Water management focus: Closed-loop dewatering system met environmental and operational demands.
③ Proven African experience: Turnkey delivery from engineering to commissioning within 1.5 months, supported by detailed technical documentation (e.g., sand pump curves, labor schedules).
JXSC adalah produsen peralatan pertambangan profesional & ahli solusi bijih pertambangan. Ini memiliki banyak kasus yang berhasil seperti pabrik emas, solusi berlian, dll., Jika Anda membutuhkan layanan seperti itu, silakan hubungi kami.
Hubungi Kami Sekarang
Jika Anda memiliki pertanyaan tentang produk kami, silakan isi formulir di bawah ini, dan kami akan menghubungi Anda dalam waktu 24 jam. Yakinlah bahwa kami tidak akan mengungkapkan informasi Anda kepada siapa pun.
English 
French 
Spanish 
Portuguese 
Indonesian