Diamond Ore Mining Equipment

The global diamond mining industry relies on sophisticated processing systems to recover these precious gems from low-grade ore (often <1 carat/ton). This guide examines:

• Geological formation of economic diamond deposits
• Key equipment for alluvial & hard rock operations
• Processing flowsheets from leading mines
• Emerging recovery technologies

Key Fact: Over 75% of commercial diamonds require density-based separation due to particle sizes below 10mm.

Las menas de diamantes son extremadamente raras, con concentraciones de como mucho partes por billón en la roca madre. La mayoría de los diamantes se encontraron en depósitos aluviales. También se encuentran diamantes sueltos a lo largo de las costas existentes y antiguas, donde tienden a acumularse debido a su tamaño y densidad.

En raras ocasiones, se han encontrado en till glaciar (sobre todo en Wisconsin e Indiana), pero estos depósitos no son de calidad comercial. Estos tipos de yacimientos se derivaron de intrusiones ígneas localizadas a través de la meteorización y el transporte por el viento o el agua.

La mayoría de los diamantes proceden del manto terrestre, y la mayor parte de esta sección trata de ellos. Sin embargo, existen otras fuentes. Algunos bloques de la corteza, o terranos, han quedado enterrados a suficiente profundidad a medida que la corteza se espesaba, de modo que han experimentado un metamorfismo de altísima presión. Estos han distribuido uniformemente microdiamantes que no muestran signos de transporte por magma.  

A common misconception is that diamonds are formed from highly compressed coal. most diamonds that have been dated are far older than the first land plants. It is possible that diamonds can form from coal in subduction zones, but diamonds formed in this way are rare, and the carbon source is more likely carbonate rocks and organic carbon in sediments, rather than coal.

The 10 largest diamond mines in the world by measurable reserves contain more than one billion carats of recoverable diamonds. Russia has almost half of the world’s biggest diamond mines, while Botswana has two mines, including the world’s largest diamond-producing mine, Orapa. Details as below:

• Jubilee, also known as the Yubileyny diamond mine, located in Sakha (Yakutia), Republic of Russia, is the biggest diamond mine in the world.
• En Udachny diamond mine, also located in the Yakutia region of Russia, ranks as the world’s second-largest diamond mine by reserve size.
• Mir or Mirny, another diamond mine in the Yakutia region of Russia, is the third biggest diamond mine in the world.
• Argyle diamond mine, located in the Kimberley region of Western Australia, ranks as the world’s biggest diamond mine if JORC reserves alone are taken into account.
• Catoca diamond mine in Angola ranks as the fifth biggest diamond mine in the world.
• Venetia diamond mine, located 80km from Musina in Limpopo Province of South Africa, ranks as the world’s sixth largest diamond mine.
• Grib diamond mine, which is yet to commence commercial production, is Russia’s fourth largest and the world’s seventh largest diamond mine.
• Jwaneng diamond mine in the African country of Botswana ranks as the eighth biggest diamond mine in the world.
• Orapa diamond mine, located 240km west of Francistown city in Central Botswana, is the ninth largest diamond mine in the world by reserve.
• Botuobinskaya diamond mine, due to commence production in 2015, is located in the Nakyn kimberlite field, around 200km north-west of Nyurba in the Yakutia region of Russia.

Other countries that produce diamonds include Congo (gold), Brazil, Guyana, Venezuela, Central Africa, Garner, Guinea, Ivory Coast, Liberia, Namibia, Sierra Leone, Tanzania, Zimbabwe, Indonesia, India, China, Canada, and so on.

The diamond raw material mostly exists as alluvial type, sand, stone, gravel, sticky clay, etc. Need to use various kinds of diamond ore mining equipment to extract diamond. So firstly, will need to washing clean the material with diamond washing trommel scrubber, wash clean the sticky clay, remove some big stone by grizzly bar when feeding material, and sieving out needed size particles by high frequency vibration screen, this is according to the diamond ore sizes, for example, there has diamond size range 2-15mm, then screen mesh size can make 2 mm and 15 mm. After sieving out needed sizes, you can use the heavy media concentrator to concentrate diamond ore, such as a diamond jig separator, mesa vibrante, etc., or use an X-ray machine to select out diamond. Those are all useful diamond ore mining equipment.

JXSC Mine Machinery Company in China has more than 40 years of professional experience in diamond ore mining equipment, can design a full set of diamond washing plant flowchart, provide a complete set of diamond mining equipment, and send an engineer to the diamond mine site for diamond mining equipment installation and commissioning guidance. Have already built many diamond washing plants in Angola, South Africa, Russia, Brazil, Botswana, etc.

Below are some diamond washing plant flowchart descriptions that JXSC Engineers recommend for a diamond processing plant:

For Alluvial Diamond

Feeding->lavado->principal tamizado->2ª etapa de tamizado de las partículas del tamaño necesario->concentrador de medios pesados para concentrar mineral diamantífero->Rayos X para seleccionar diamante 

For Rock Diamond

Alimentación->trituración primaria->2a trituración->lavado->cribado del tamaño necesario->concentrador de medios pesados para concentrar el mineral de diamante->radiografía para seleccionar el diamante.

Primary Diamond Processing

Alimentación

Diamond ore feeding machine can be a vibration feeder, feeding hopper, electromagnetic vibration feeder, belt feeder, wheel loader, or excavator feed directly. Depends on process capacity and raw material conditions to choose which feeding machine for diamond ore mining. The vibration feeder can be made with a grizzly bar to remove some big stones when feeding.

Lavado

The diamond washing machine is for washing clean the clay and mud in diamond raw material, the most popular diamond ore washing machine is the diamond washing trommel scrubber. The diamond drum scrubber washer has an especially good washing effect for diamond ore, and can wash the sticky clay very clean.

Primary Sieving

After washing the clay clean with a diamond washing trommel scrubber, we need to remove some big waste stones; the under screen materail will go to the next machine. This diamond ore mining equipment can use a normal trommel screen or a diamond ore high-frequency vibration screen. Over-screen particles will be transferred away by a belt conveyor.

2nd Stage Sieving

Tras el tamizado primario, se necesitan 2^nd stage sieving again to screen out needed size particles, usually use a high frequency vibration screen, screen size according to diamond concentrate size.Over-screen particles will be transferred away by belt conveyor, under screen partciles will go to the heavy medium concentrator machine to select diamond.

Heavy Medium Concentrator to Concentrate Diamond Ore

The diamond mining equipment heavy medium concentrator can be a diamond jig separator or a shaking table, depending on the diamond concentrate size.

X-ray to Select Diamond

The concentrate ore discharged from the heavy medium concentrator machine can use X-ray machine to select diamond concentrate.

Below are some pictures of diamond washing plant diamond ore mining equipment project cases JXSC provides to customers:

Conclusión

This guide has explored the complete diamond mining process from geological formation to final recovery. With diamond concentrations measured in parts per billion and most deposits requiring density separation for particles under 10mm, specialized equipment like trommel scrubbers, jig separators, and X-ray sorters is essential for profitable operations. Whether processing alluvial deposits or hard rock sources, proper washing, sieving, and concentration processes can significantly improve recovery rates. For operations seeking optimized diamond recovery solutions, consulting with experienced equipment providers like JXSC with 40+ years of field expertise can help design efficient processing plants tailored to specific ore characteristics and production targets.