Concrete Compression Testing Machine

Concrete Compression Testing Machine

【Force Measuring Range】 200~2000kN, 300~3000kN
【Maximum Test Force】2000kN, 3000kN
【Usage/Application】The testing machine is mainly used for the compressive strength test of building materials such as brick, stone, cement, and concrete, as well as the mechanical property test of other materials. It is widely used in the construction industry and testing units.

 

Contact Us via WhatsAppChat Online on WhatsApp

Advantages

JXSC’s concrete compression test machines are designed to handle the daily demands of testing concrete cylinders, beams, blocks, and cubes. JXSC’s compression machines span a testing range from 20 to 3000 KN. All compression test machines meet the requirements of GB / t50081-2002 standard for test methods of mechanical properties of ordinary concrete. It is widely used in the construction industry and testing units.

【Concrete Compression Testing Machine Types】We supply electro  hydraulic servo pressure testing machine, microcomputer-controlled automatic pressure testing machine, compression testing machine with digital display, and so on.

Electro hydraulic servo pressure testing machine is mainly used for the compressive strength test of concrete, components, pipe piles, hydraulic jacks, building materials, etc. for railway, highway, bridge, port, and high-rise building engineering. It can also be used for the compressive strength test of metal and other non-metallic materials and components. The control method adopts the automatic control of the computer electro-hydraulic servo system to realize the automatic loading at the same rate and the maintenance of constant test force. It has the functions of the automatic, manual, and constant load operation, real-time display of test data and curve, storage for future reference, automatic generation of test report, printout, and network interface. The electric lifting upper pressing plate is used to easily and freely adjust the test space, and its powerful function can meet the requirements of most users.

Microcomputer-controlled automatic pressure testing machine is special test equipment for testing and analyzing the mechanical properties of concrete. It is widely used in the construction industry and testing units. Its main functions are 1. Automatic control measurement, data acquisition and processing, drawing and printing test curve, and test report. 2. The measurement and control system communicates with the computer through RS232, which is very convenient for maintenance or replacement. 3. The resolution of the test force measurement is 1 / 100000. 4. The measurement and control system software can work under the Windows98 / 2000 / XP / NT Chinese operating system. 5. The digital electro-hydraulic proportional valve is used as the control actuator, which has a strong anti-pollution ability and can realize long-term trouble-free operation.

A concrete compression testing machine with digital display adopts pressure loading, so the transmission is stable and reliable. The dynamic pendulum dynamometer is used for force measurement, with high precision and an indication error of less than 1%. The pressure on the test piece is directly read out on the digital display of the dynamometer.

Concrete Compression Testing Machine
video

Product Structure

The manual concrete compression testing machine is composed of a machine body, oil pump, oil delivery valve, oil return valve, and force measuring instrument.
1. Machine Body
The machine body is connected by the upper crossbeam, base (with oil cylinder), and four columns. The upper crossbeam is equipped with a worm gearbox, motor, nut, worm gear and connecting screw rod. There is ball seat and upper bearing pressing plate under the screw rod. Due to the action of the concave sphere and ball seat under the screw rod, the pressure bearing plate can move slightly freely and obliquely. Therefore, when the test piece is under pressure, the contact between the upper pressing plate and the test piece surface can be adjusted automatically. According to the size of the test piece, start the lifting motor and adjust the screw rod to an appropriate height.

The upper and lower bearing plates are ground flat after heat treatment, and the surface of the lower bearing seat plate is engraved with a positioning wireframe to facilitate the placement of the center of the test piece. The lower bearing pressure plate is placed on the piston with a dust cover in the middle. The crushed pieces of the test piece slide into the dust cover to prevent fine debris from invading between the oil cylinder and the piston. When the piston is subjected to the rise of oil pressure, push the lower bearing pressure plate to press the test piece upward.

The oil cylinder is at the lower part of the frame, and the composite sealing washer and rubber sealing ring are embedded at the upper part of the inner wall of the oil cylinder to prevent excessive oil overflow between the piston and the oil cylinder under high pressure. There is an oil spill pipe on the right side of the oil cylinder, which directly connects a small amount of spilled oil back to the oil tank.

2. Oil Pump, Oil Delivery, and Return Valve
After the oil pump and motor are connected, they are directly fixed on the support, the oil supply and return valves are installed on both sides of the force measuring frame, and the oil tank is fixed at the lower part of the support.

The oil pump is a straight shaft axial five-column pump. When adding force, the high-pressure oil from the oil pump enters the oil delivery valve, and the oil volume of the oil cylinder can be adjusted by controlling the operation handwheel to achieve the required force application speed (the oil delivery valve and safety valve are integrated). The return oil from the oil cylinder flows back to the oil tank through the return valve to relieve the force.

3. Force Measuring Instrument
The force measuring instrument adopts the force value display instrument of the jl-02 testing machine. The display instrument is composed of a sensor, amplification board, a / D conversion board, and micro digital display printer.

Technical Parameters

ModelTYA-1000/2000/3000CTM-2000  / 2000N / 2000S / 2000SECTM-300
Measuring Range(kN)1000 / 2000 / 30000-2000300
Relative Error±1.0%
Platen Dimension(mm)220*280 / 220*290 / 340*340220*290 / 220*290  / 220*290 /  260*320Ф125
Max. Vertical Clearance Between Platen(mm)330330 / 330 / 320 / 300180
Maximum Travel of Piston(mm)4040 / 40 / 100  / 4080
Diameter of Piston(mm)Ф250 / Ф250 / Ф310Ф250Ф125
Rated Pressure of Oil Pump(Mpa)404025
Power Supply220V AC 0.75kW

 

Full Automatic Eletro Hydraulic Servo Concrete Compression Test machine

ModelUTM-1000C
Maximum Capacity1000 kN
Range2%-100%F.S.(full range, without gear)
Relative Error±1%(±0.5% )
Reading AccuracyGrade 1(Grade 0.5)
Resolution (F.S.)1/200000F.S.(1/300000 F.S.)
Column Number6
Width Between Two Column510 mm
Max Tensile Space600 mm
Max Compression Space600 mm
Bending Test Distance Between Two Points100-400
Round Specimen Clamp DiameterØ20-Ø40 mm
Flat Specimen Clamp Thickness0-40 mm
Stroke200 mm
Pistons Rise Fastest Speed80 mm
Beam Rising Speed310 mm/ min
Displacement Reading Relative Error±1% (±0.5% )
Deformation Reading Relative Error±1% (±0.5% )
Motor Capacity2.5 kW
Main Unit Dimension (mm)960×620×2100
Oil Source Cabinet Dimension (mm)1000×600×910
Main Unit Net Weight2200 kg
Working Temperature10~35 ℃
Relative Humidity<80%
Power Supply220VAC or 380VAC

 

Contact Us Now

If you have some questions about our products, please feel free to fill out the form below, and we will contact you within 24 hours. Rest assured that we won’t reveal your information to anyone.

Free consult with our sales and engineering team



  • Your information is safe. Check our privacy notice for more details.
  • We do not provide jobs, mineral mines. We sales mining equipment only!
  • We have no interest in partership and investment!