Soil & Rock Separator
【Capacity】0-1000 TPH
【Feeding Size】 <45 mm
【Shaft Number】6-20 pcs
【Application】It is used to screen and separate debris, stone sand, ore, coal, coal gangue, building materials, construction waste, solid waste, and other materials.
Chat Online on WhatsAppAdvantages
The soil & rock separator is for high mud content, mud-wrapped stone or stone containing mud, water content, high viscosity, difficult to separate, stone block large and other complex sand and gold ore raw materials to carry out effective scientific screening, through the separation of mud and stone, will be wrapped in the mud inside the gold cleaning out, so that it improves the gold recovery rate, to achieve the effective use of resources.
This new gold panning equipment is also called soil and rock stone separator, separating screen, roller separator, multifunctional roller separating screen, multi-stage continuous roller screen, butterfly screen, etc., It applies to the separation conditions of various stones such as mud rock, sandstone & ore, various domestic wastes, various commercial & industrial wastes, coal, decoration & construction wastes, viscous wet materials, etc.,
Advantages
- Sturdy modular structure, small output power, low energy consumption, stable output adjustable, small size, does not occupy indoor space, is movable. Can support wheeled mobile or sled base mobile.
- Large processing capacity: To solve the work capacity problem, the same volume of traditional vibration is 10 times the big slip, and there is a high degree of sorting.
- Low energy consumption, can work continuously for 24 hours without interruption.
- Good decomposition of clay lumps improves the gold recovery rate.
- Wear-resistant chain drive, suitable for harsh and different work sites.
- Firm lubrication of bearings, less wearing parts.
- Effective sealing of the shell to prevent dust and noise.
- The screen plate and the high-pressure ore washing system can be adjusted.
- The gold separating system can be matched with a drum chute, creep chute, centrifuge, automatic gold separator, vibrating and swinging gold separator, circulating gold separator, jigger, shaking table, and so on.
Separation of mud and stone is a technical problem in the mining industry, and the current use of hydraulic separation equipment to separate mud, sand, and gravel, such as ore washing machines, sand washing machines, etc., But these traditional washing equipment must be consumed a large amount of water, for many arid areas and the establishment of environmentally friendly enterprises is a greater disadvantage. Our new soil and rock separator is suitable for processing highly viscous and not easy to separate mineral materials, continuous crack screening during operation, easier dispersing the material and reasonably improving the screening rate.
Product Structure
Key components of the soil and rock stone separator include a vibrating motor, a screen deck, roller bars, supporting frame, and a discharge mechanism for separated materials.
【Solid and Rock Separator Working Principle】 The solid and rock stone separator is used to separate materials smaller than the specified size. The sieve disk adopts a butterfly structure, set with evenly distributed rollers, and there are several sieve disks along the axial direction of the rotating shaft. The surface of the sieve disk is painted with ceramic, which has the double effect of anti-corrosion and is wear-resistant. The rotary shaft is driven to rotate by driving equipment. After the material enters the equipment, the material larger than the screen disk gap is discharged from the top of the screen disk, and the material smaller than the screen disk gap falls into the gold selection system below the gap. When the screen surface of different materials and then the screen surface of a part of the intersection occurs when the start of axial operation, to improve the efficiency of screening work. Small particles of material fall into the bottom of the separator, into the gold separation system.
Technical Parameters
Model | Power (kw) | Shaft Clearance (mm) | Shaft Number (pcs) | Inlet Size (mm) | Capacity (t/h) | Reference Weight (t) |
0816 | 7.5-11 | 10-50 | 6-8 | <20 | 30-100 | 4 |
1012 | 11-15 | 10-50 | 7-10 | <25 | 60-180 | 7 |
1230 | 18.5-30 | 15-70 | 8-11 | <30 | 100-300 | 12 |
1235 | 22-37 | 20-80 | 10-13 | <30 | 130-350 | 13 |
1340 | 37-45 | 20-90 | 11-14 | <33 | 150-500 | 16 |
1445 | 45-55 | 25-100 | 12-15 | <35 | 180-600 | 20 |
1550 | 55-75 | 25-100 | 13-17 | <38 | 200-700 | 23 |
1665 | 75-90 | 30-100 | 14-18 | <40 | 250-800 | 28 |
1860 | 75-110 | 30-100 | 15-20 | <45 | 350-1000 | 35 |
Successful Cases
Contact Us Now
If you have some questions about our products, please feel free to fill out the form below, and we will contact you within 24 hours. Rest assured that we won’t reveal your information to anyone.