【Introduce】: XFD I Single cell laboratory flotation machine
XFD Single cell laboratory flotation machine is always used in geology, metallurgy, building materials, chemical, and another industrial laboratory to float a small number of ore samples.
【XFD Series cell Flotation machine consists of the following main components】:
( 1 ) base ( 2 ) the carrier ( 3 ) the tank ( 4 ) stir part (5) blade part ( 6 ) spindle part ( 7 ) the cover ( 8 ) the motor ( 9 ) flow meter ( 10 ) switch controls ( 11 ) blade switch
All parts are fastened to the body, the spindle ( 1 ) rotates in the clockwise direction, the movement through a belt to the spindle pulley belt and the spindle pulley has three different speeds. Rotation of the blade ( 3 ) driven by the blade driven pulley the motor can have two different speed. The blade height can be adjusted by the position of the butterfly nut
Flotation machine is driven by V-belt drive motor rotating impeller to form a centrifugal vacuum, on the one hand, inhalation pulp mixed with sufficient air , on the other hand stirring the pulp to mixed with drugs, while refined foam, mineral adhesive foam on top, float to the surface and then form a slurry bubble mineralization. Adjust shutter’s height and control surface to scrape the useful foam.
|Rotary Speed of impeller(rpm)||2590||2590||2100||1910||1890||1400|
|Rotary Speed of scraper (rpm)||0-30||7.9、19.1||8.6,12.9,17.2|
|Spindle motor||51K90A-EF 2800rpm 90w||JW6324 1410Rpm 250w|
If you have some questions about our products, please feel free to fill out the form below, and we will contact you within 24 hours. Rest assured that we won’t reveal your information to anyone.