The lime ball mill can superfinely grind lime or coal ash. The equipment consists of the main parts such as the feeding part, the discharging part, the turning part, and the transmission part (reducer, small transmission gear, motor, and electronic control). Simple and reasonable structure, reliable operation and large processing capacity.
Lime is one of the main raw materials for concrete production, and its main function is to provide effective calcium oxide with cement, so that it can interact with certain ingredients in siliceous materials under hydrothermal conditions.
Lime ball mill advantages
1. The lime ball mill adopts rolling bearings instead of sliding bearings, which greatly reduces friction, easy starting and significant energy saving;
2. It adopts a cone design at the discharge end. This not only increases the volume, but also forces the steel ball at the cone end to be classified. The closer it is to the exit, the smaller the diameter of the steel ball, which increases the effect of repeated grinding and the fineness of the material.
3. It uses the grooved ring-shaped liner, which increases the contact surface of the ball ore, strengthens the grinding effect, and has the ability to enhance the ore and reduce the power;
4. It adopts a whole frame, which is convenient for civil construction and equipment installation. The main uses of lime ball mills: Lime ball mills are used to grind a variety of ore and other materials. They are widely used in various sectors of the national economy such as beneficiation, construction and chemical industries.
Lime ball mill working principle
The ball mill for lime is a horizontal cylindrical rotating device, driven by external gears, two bins, and a lattice ball mill. The material enters the first silo of the mill spirally through the feeding device through the hollow shaft of the feeding material. There is a stepped lining or a corrugated lining in the hopper, which contains steel balls of different specifications. The centrifugal force generated by the rotation of the cylinder brings the steel balls to a certain height After falling, it has a heavy impact and grinding effect on the material. After the material is coarsely ground in the first bin, it enters the second bin through a single-layer compartment board. This bin is inlaid with a flat liner and steel balls inside to further grind the material. The powder is discharged through the discharge grate plate to complete the grinding operation.
Lime ball mill specifications
Models | rotate speed (r/min) | ball load (t) | input size (mm) | discharge size (mm) | capacity (t/h) | motor power (kw) | weight (t) |
Ф900×1800 | 36-38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 5.85 |
Ф900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.98 |
Ф1200×2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 13.6 |
Ф1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 14.3 |
Ф1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 15.6 |
Ф1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 19.5 |
Ф1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 22 |
Ф1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
Ф1830×3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 34.5 |
Ф1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 38 |
Ф1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
Ф1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
Ф2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 45 |
Ф2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 | 56 |
Ф2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 12-48 | 280 | 59.5 |
Ф2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 | 54.5 |
Ф2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 | 61 |
Ф2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 62.5 |
Ф2200×7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 64.8 |
Ф2400×3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7-50 | 245 | 58 |
Ф2400×4500 | 21 | 30 | ≤25 | 0.074-0.4 | 8.5-60 | 320 | 72 |
Ф2700×4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 22-80 | 380 | 95 |
Ф2700×4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 26-90 | 480 | 102 |
Ф3200×4500 | 18 | 65 | ≤25 | 0.074-0.4 | / | 630 | 149 |
Ф3600×4500 | 17 | 90 | ≤25 | 0.074-0.4 | / | 850 | 169 |
Ф3600×6000 | 17 | 110 | ≤25 | 0.074-0.4 | / | 1250 | 198 |
Ф3600×8500 | 18 | 131 | ≤25 | 0.074-0.4 | 45.8-256 | 1800 | 260 |
Ф4000×5000 | 16.9 | 121 | ≤25 | 0.074-0.4 | 45-208 | 1500 | 230 |
Ф4000×6000 | 16.9 | 146 | ≤25 | 0.074-0.4 | 65-248 | 1600 | 242 |
Ф4000×6700 | 16.9 | 149 | ≤25 | 0.074-0.4 | 75-252 | 1800 | 249 |
Ф4500×6400 | 15.6 | 172 | ≤25 | 0.074-0.4 | 84-306 | 2000 | 280 |
Ф5030×6400 | 14.4 | 216 | ≤25 | 0.074-0.4 | 98-386 | 2500 | 320 |
Ф5030×8300 | 14.4 | 266 | ≤25 | 0.074-0.4 | 118-500 | 3300 | 403 |
Ф5500×8500 | 13.8 | 338 | ≤25 | 0.074-0.4 | 148-615 | 4500 | 525 |
How to select lime ball mill?
1. Ensure production capacity
When selecting the model of limestone wet ball mill, it must be able to complete the required output under the condition that the required fineness of grinding is achieved, so as to achieve greater profit for the company’s production;
2. Ability to leave adequate surplus
When selecting the limestone wet ball mill model, we must consider the changes in the hardness and fineness of the ore. The selected limestone wet ball mill model can be used more widely to ensure the smooth commissioning of the equipment at the initial stage;
3. Due consideration is given to large equipment
When selecting a limestone wet ball mill model, it is recommended that you properly consider large limestone wet ball mill models for three main reasons: First, large-scale equipment is the trend of recent industrial development; second, large-scale limestone wet ball mill equipment. The equipment is light in weight, occupies less land, has fewer production systems, fewer operators and auxiliary systems, and the corresponding investment and production costs are lower. Third, the large-scale limestone wet ball mill has good continuous operation and the unit production efficiency is smaller. The model of the limestone wet ball mill is higher.
Lime ball mill price
As a professional large-scale ball mill equipment manufacturer, JXSC not only produces high-quality limestone wet ball mills, but also has a complete range of models. It is important that Hongxing is a local large-scale ball mill direct sales company in Henan, so in terms of the price of limestone wet ball mills Although the price of Red Star Limestone Wet Ball Mill may not be very low, under the premise of the same quality, the price of Red Star Limestone Wet Ball Mill is relatively favorable, so users and friends need not worry too much. If you want to know more about the details of the red star limestone wet ball mill and other equipment details, please feel free to consult.
LATEST PRODUCTS
Suspended Vibration Cone Concentrator
【Feeding Size】 0.010-0.074 mm【Feeding Conc…
Vibrating Blanket Machine
【Capacity】1.5-2.5 t/h 【Feeding Size】 <0.5 …
Belt Pressure Filter Machine
The belt filter press (belt filter) is a commonly…